OS X to Novell Netware networking

smatanovic

Hi everyone. I am trying to connect a PowerBook running Mac OS X 10.2

to a windows-based Netware network using the IPX protocol (v. 4.11). Prosoft makes a Netware client for X, but it requires Netware v. 5 or above. Novell does not make a OS X client for Netware 4.11.



Any idea whether a Netware client, installed on Win98 w/in Virtual PC, would be able

to connect and access all of the resources on an IPX network?



Does anyone have any other ideas or insights?



Thanks in advance,

SM

alcimedes

i'm a sys admin at a major university. right now we're going through the exact process you're describing. what i can tell you.



you can't use a novel client in OSX over IPX. IPX is old and dead, so OXS doesn't support it. however, old novel networks still rely on it. so you're screwed basically.



there is a client for OSX that works over TCP/IP, but it sounds like that's not what you need. your only other option is to boot into OS9 to connect to your novel drives. the OS9 client still supports IPX.

smatanovic

Can I run the OS9 client in classic mode and still gain access to all of the network resources (specifically printers)? I have to use VPC, as well, because I have several Windows-only apps that I must use.



[quote]Originally posted by alcimedes:

<strong>i'm a sys admin at a major university. right now we're going through the exact process you're describing. what i can tell you.



you can't use a novel client in OSX over IPX. IPX is old and dead, so OXS doesn't support it. however, old novel networks still rely on it. so you're screwed basically.



there is a client for OSX that works over TCP/IP, but it sounds like that's not what you need. your only other option is to boot into OS9 to connect to your novel drives. the OS9 client still supports IPX.</strong><hr></blockquote>

alcimedes

as far as i know, you cannot boot into OS9 to access the novel drives.



i've checked around a few places trying to get more information about this but with no luck so far. seems that IPX will never go anywhere on OSX.

torifile

I haven't done this in a long time, but as far as I can remember, I was able to use the novell client under win98 in VPC. I hated it b/c it was so freakin' slow, but it worked.

alcimedes

oh crap, what i meant to say was that you can't just launch classic and get it to work. booting into OS9 does work just fine.

smatanovic

Is this even worth doing, then? I work in a pc-only office, but want to use a Powerbook as my primary machine, w/o losing access to the windows-olny apps that we use. It sounds more and more like I'm going to be stuck using a Windows box (or notebook) rather than a powerbook...





[quote]Originally posted by torifile:

<strong>I haven't done this in a long time, but as far as I can remember, I was able to use the novell client under win98 in VPC. I hated it b/c it was so freakin' slow, but it worked. </strong><hr></blockquote>

smatanovic

^^^

torifile

Can you use Microsoft's Remote Desktop Client? It'll allow you to use windows only apps if you have a terminal server that you can log into. Otherwise, VPC will work for Novell log in (I've used it before), but it's just really slow.

smatanovic

My IT dept. is requiring that I use a Novell client. I am not sure if this is a security issue or something else, but, since I am the only Mac user in the firm, I don't have a whole lot of leverage.



Thanks,

SM



[quote]Originally posted by torifile:

<strong>Can you use Microsoft's Remote Desktop Client? It'll allow you to use windows only apps if you have a terminal server that you can log into. Otherwise, VPC will work for Novell log in (I've used it before), but it's just really slow.</strong><hr></blockquote>

patmcfar8

I have a similar problem... Anybody know how to get 10.2 to work with Novell Groupwise 5.5?