iMac DV to ATX conversion.

jeremiah richjeremiah rich
Posted:
in Genius Bar edited January 2014
Ok. So I am very sure the power supply has fried for my iMac. (Not the screen) I have tested it with a volt-ohm meter and it reads nothing. (The power supply that is) I have looked on the net everywhere to try to figure out how to build some sort of power supply for it to no avail, so I was wondering if anyone could help me out. thanks.

Comments

  • Reply 1 of 4
    jeremiah richjeremiah rich Posts: 853member
    I don't usually bump topics, but I haven't gotten a reply yet, so here is to hoping.... Thankya.
  • Reply 2 of 4
    elricelric Posts: 230member
    Perhaps you could get the repair/tech manual for the version of the imac you have off ebay. As far as that goes you might be able to find one cheap.
  • Reply 3 of 4
    kris joneskris jones Posts: 1member
    I'm in the middle of the ATX mod for the original iMac series; I have several motherboards to play with.



    I just purchased a DV mobo, though, and I would also like to mod it for an ATX powersupply also.



    I will look around for the link to the original iMac mod, maybe that will get you pointed in the right direction.



    [ 01-22-2003: Message edited by: Kris Jones ]</p>
  • Reply 4 of 4
    lucaluca Posts: 3,833member
    Try <a href="http://www.xlr8yourmac.com"; target="_blank">www.xlr8yourmac.com</a> and searching for the mod. There are lots of things there.



    You could also try the hack at <a href="http://www.applefritter.com"; target="_blank">www.applefritter.com</a> (which is a really fun site in its own right).
Sign In or Register to comment.