External Display Monitors not working with new MB & MBP
Hi Guys - there are hundreds of threads on the support and mac forums about - wondered if any one had a work around yet? Issue is there seems to be a major bug in the DVI out drivers, so if you connect your new MacBook or MBP to an external Monitor (Apple Cinema or other make) and then your Mac goes to sleep , you cannot 'wake' the external monitor again - either it stays black or worse you get a sort of snowy, out of signal TV look! You need to unplug your monitor, , then when your Mac is awake, re-plug in the external screen.
Report this to Apple guys and post anything you know on it here - sooner they send out a patch to fix it the quicker can get back to normal work!
Report this to Apple guys and post anything you know on it here - sooner they send out a patch to fix it the quicker can get back to normal work!
Comments
I spoke too soon, this happened to me today, not when waking it up from complete sleep but when just the monitor went to sleep. The ACD would come up with fuzz, then blink off and on every minute with fuzz each time. Unplugged and replugging the monitor was the only solution.
Yeh - Mind is sporadic - sometimes it works just fine, other tiems I get the White Noise screen on the external monitor other times jsut can't wake up the monitor at all and need to un-plug. I suspect it will be soved by the patch coming to fix other external monitor issues - mentioned on todays appleinsider news?
another qwarky behavior that started today was upon bootup when connected to the external display, the displays were reversed. the main display was on the mbp and the secondary display was my external monitor. it has always been the reverse of this, and system preferences confirmed that the primary display was my external, even though the primary was functioning on the main laptop display. just my two cents to add to the thread
I have woken it up many times with no trouble the past couple weeks.
ditto.
MacBook Pro -> Dell 20" widescreen via DVI
Hi Guys - there are hundreds of threads on the support and mac forums about - wondered if any one had a work around yet? Issue is there seems to be a major bug in the DVI out drivers, so if you connect your new MacBook or MBP to an external Monitor (Apple Cinema or other make) and then your Mac goes to sleep , you cannot 'wake' the external monitor again - either it stays black or worse you get a sort of snowy, out of signal TV look! You need to unplug your monitor, , then when your Mac is awake, re-plug in the external screen.
Report this to Apple guys and post anything you know on it here - sooner they send out a patch to fix it the quicker can get back to normal work!
No workaround but it happens less if you change your settings to not shut off the display and just leave you Screensaver on. If mine turns off the display for any longer than a few minutes it crashes. It is driving me nuts - I hope the release a fix soon, although I am not sure they have publicly stated it is a bug yet..
if anyone knows if there has been official word from Apple, please post the link.
My problem is similar but different. I have a Macbook that has been working absolutely fine with an external monitor for a few months. I have an HDMI input on my TV and have been using it as a monitor through an adapter and an HDMI cable. I do not have an issue with my computer sleeping or anything like that. Today, all of a sudden, my monitor shows only the generic stars and purple/blue/pink desktop screen. I tried changing the resolution and THAT window showed on the screen, but once I closed it I was back to the generic desktop shot. Any help would be greatly appreciated.
Thanks!
John
Hi,
My problem is similar but different. I have a Macbook that has been working absolutely fine with an external monitor for a few months. I have an HDMI input on my TV and have been using it as a monitor through an adapter and an HDMI cable. I do not have an issue with my computer sleeping or anything like that. Today, all of a sudden, my monitor shows only the generic stars and purple/blue/pink desktop screen. I tried changing the resolution and THAT window showed on the screen, but once I closed it I was back to the generic desktop shot. Any help would be greatly appreciated.
Thanks!
John
It sounds as though the extended desktop (spanning) is being displayed on your TV? For some reason your MacBook doesn't realise that it should be switching the spanning off and displaying the primary desktop on the TV.
With your MacBook open, it might be worth switching the windows around in System Preferences and try switching between mirroring and spanning a couple of times. That might be enough to reset the MacBook?
Hi Guys - there are hundreds of threads on the support and mac forums about - wondered if any one had a work around yet? Issue is there seems to be a major bug in the DVI out drivers, so if you connect your new MacBook or MBP to an external Monitor (Apple Cinema or other make) and then your Mac goes to sleep , you cannot 'wake' the external monitor again - either it stays black or worse you get a sort of snowy, out of signal TV look! You need to unplug your monitor, , then when your Mac is awake, re-plug in the external screen.
Report this to Apple guys and post anything you know on it here - sooner they send out a patch to fix it the quicker can get back to normal work!
Still nothing from Apple on this - it is driving me nuts. Does anyone have any new information?