Review: Zyxel MultyX is a decent Airport Extreme replacement for the home, with a big conf...

Posted:
in General Discussion edited January 2021
Now that the AirPort is completely gone, there's an opening for easy to configure and reliable networking hardware. Zyxel's Multy X system is fast, with excellent hardware -- but not without some rough edges.

Zyxel Multy X AC3000

By the numbers

The Zyxel Multy X is what Wi-Fi networking types call an "AC3000" system. As such, the unit has a 5Ghz radio with up to 1733Mbps speeds used for backhaul between the mesh node and the main unit. For the device-facing radios like your iPhone, you get 5Ghz up to 866Mbps and 2.4Ghz up to 400Mbps. When you sum all these numbers, you get 2999, which is nominally 3000.

On the wired side, it delivers one gigabit WAN port and three gigabit LAN ports. The specific CPU in the unit isn't really relevant, but it has 4GB of eMMC and 512MB of RAM. Each unit of the pair in the box weighs just under 2 pounds, and are a sizable 9.3 x 7 x 2 inches.

The Good

The Zyxel Multy X has excellent signal strength and speeds. It performed excellently in some of the most demanding environments we could find in the environs we tested it in. We used it alternately in the same environ as the Amplifi HD mesh system we examined, and found that it consistently delivered better speed to connected devices.

the app view of speed tests


Zyxel's Multy X app provides a decent amount of features, including speed tests, checking the bandwidth and signal strength between base and nodes, and parental controls for blocking a device or limiting access to specific times. The parental controls cover the required basics: setting time limits, and blocking a device, but they don't go further: you can't block specific content like YouTube or Facebook, for example.

Parental controls
Parental controls


A QR code scanning feature allows for a simple to share Wi-Fi credentials. The iPhone reads the QR code, asks if you'd like to join the network, and then sets it up. We never thought we'd see a QR code implementation we'd like.

Wi-Fi settings recognized by QR code. Impressive.
Wi-Fi settings recognized by QR code. Impressive.


Signal and speeds were excellent. For example, in our test home, the signal never adequately reached the back of the building. We tested with the default ISP provided Wi-Fi, a single Zyxel node, and then with both nodes installed. The signal dispersion was solved only by the introduction of the second node, although speeds were faster the minute we used the first node in place.

the default ISP Wi-Fi doesn't reach the back of the house
The default ISP Wi-Fi system shows that signal just can't reach the back of the house.


One Zyxel node doesn't reach back of house, but speeds increase
With one Zyxel node, we're still unable to reach the back of the house, but speeds went up markedly.

The bad

Initial setup is terrible on older devices. App setup starts by using Bluetooth Low Energy (BLE) to detect and transfer Wi-Fi name and password to the router. We were able to set up the router using iPhone 8 Plus on iOS 11.4 and Android 8.1.0 on a Nexus 6P.

On an iPhone 6 running iOS 11.4, the app crashed every single time that we tried to run the app to setup the router. We were successfully to run the app on iPhone 6, but only by creating a Zyxel cloud account, and controlling the routers remotely through the iPhone 6. Trying to do it without the Zyxel account failed every time.

the app's home screen
The home screen for the app, as seen from Android


Both the main unit and mesh node are identical hardware. This can make things confusing if you find that you tear down the network and put it back in place as we do during testing. For most users, that won't pose a problem after initial setup, though.

The system does not support wired backhaul, which seems strange, given that both units have a WAN port and three-port gigabit switch. For users with Ethernet installed in-wall, this is a firm strike against this system.

The port view of Multy X
Ports! It's got ports!


The networking configuration lacks the ability to do anything like set the IP range, limit the number of addresses handed out, or do anything with DNS for the local IP like handing out a specific DNS server to DHCP clients.

When we test a number of routers, we tend to want to use the same SSID, password, and IP range, so that the growing number of client devices on the network just continue working without interruption and the Zyxel Multy X critically doesn't allow for this.

This can't be stated clearly enough, so let us say it again: you cannot change the IP range away from its default 192.168.212.1 setting. These are all things most routers allow, including the old AirPort Extreme.

Maybe that won't matter for you, but for people who have devices with reserved static local IP addresses like printers, network attached storage, some home medical equipment, and the like it is a problem. Multy X does allow you to reserve IPs for specific devices, they just have to be within the 192.168.212.xxx range.

Router options
You do get some useful options

Decent hardware, problematic practical application

Once set up and functioning, it runs like a champ. Coverage reaches where it's most difficult to cover with a single unit. The speeds are as much as 30 percent better than with some other mesh systems we've tried recently.

The difficulty in setting it up with iPhone 6 app crashes, and the networking configuration limitations that come along with it make it great for users that don't need many options, but may find it limiting once they grow beyond those basics.

As such, as a "set and forget" solution in a relatively unchallenging network environment, we like the Multy X. It's not as good as the install evolves, or if you need more advanced configuration options.

Score: 4 out of 5 for a "set and forget" install with a new iPhone to execute the setup process. But, given the inflexibility of the IP range, and the problematic setup with older devices, it is a 2.5 out of 5 for everybody else. Should Zyxel fix some of the configuration and app issues, we'll revisit the score.

The Zyxel Multy X is available from Amazon for $199 retail.

Comments

  • Reply 1 of 13
    "Initial setup is terrible on older devices. App setup starts by using Bluetooth Low Energy (BLE) to detect and transfer Wi-Fi name and password to the router." This is because iOS has no real WiFi SDK despite it being one of the top developer requests since the original iPhone SDK was released. This just causes major headaches for developers and users alike. Apple has never even said why they refuse to release a WiFi SDK but it is clear that they don't want users to scan for nearby networks. Apple must either re-embrace general purpose computing or give up on continuing to expand their market for iOS based products (the pro market for example). No one has time for this nonsense. This is a major reason why their share price is now in tatters.
    edited November 2018
  • Reply 2 of 13
    entropysentropys Posts: 4,152member
    Smallnetbuilder ranks this number three behind the Orbi AC3000 and the Velop.
    https://www.smallnetbuilder.com/tools/rankers/wifi-system/view
  • Reply 3 of 13
    jingojingo Posts: 117member
    If you're going to review kit of this type, why not review the Draytek range? A vast range of products with an immense spectrum of capability, and very professional functionality. Wi-Fi strength is only one aspect of a product's utility, but it seems like you are disproportionately interested in this rather than the other much more important capabilities. And no ethernet back-haul at all? They can't expect to be taken seriously, surely?
    watto_cobra
  • Reply 4 of 13
    This is a major reason why their share price is now in tatters.
    No it’s not. 
    dewmechasmwatto_cobra
  • Reply 5 of 13
    Sounded interesting as I started reading.
    Total nightmare by the time I had finished.
    DAalsethwatto_cobra
  • Reply 6 of 13
    dewmedewme Posts: 5,335member
    "The system does not support wired backhaul" makes this system a non-starter for me.  
    tokyojimuwatto_cobra
  • Reply 7 of 13
    Mike WuertheleMike Wuerthele Posts: 6,858administrator
    jingo said:
    If you're going to review kit of this type, why not review the Draytek range? A vast range of products with an immense spectrum of capability, and very professional functionality. Wi-Fi strength is only one aspect of a product's utility, but it seems like you are disproportionately interested in this rather than the other much more important capabilities. And no ethernet back-haul at all? They can't expect to be taken seriously, surely?
    We don't do a lot of networking reviews, and they are generally done by request. I'll add Draytek to the request list.
    watto_cobra
  • Reply 8 of 13
    dewme said:
    "The system does not support wired backhaul" makes this system a non-starter for me.  
    I feel the same way, plus not being able to change the IP range.  I can't believe these features would have been that difficult to include.
    watto_cobra
  • Reply 9 of 13
    chasmchasm Posts: 3,275member
    Having a fixed and unchangable IP address is just begging for trouble.
    watto_cobra
  • Reply 10 of 13
    vmarksvmarks Posts: 762editor
    entropys said:
    Smallnetbuilder ranks this number three behind the Orbi AC3000 and the Velop.
    https://www.smallnetbuilder.com/tools/rankers/wifi-system/view
    Smallnetbuilder doesn't test throughput, and focus on signal strength as we have here. We're working on a test to prove throughput as well - literally, how much data can it route. This is important for those of us with gigabit fiber, less so for those of us with sub 300mbps connections (majority of the US.)

    We reviewed Velop a while back, and did rate it highly. 
    watto_cobra
  • Reply 11 of 13
    vmarksvmarks Posts: 762editor
    jingo said:
    If you're going to review kit of this type, why not review the Draytek range? A vast range of products with an immense spectrum of capability, and very professional functionality. Wi-Fi strength is only one aspect of a product's utility, but it seems like you are disproportionately interested in this rather than the other much more important capabilities. And no ethernet back-haul at all? They can't expect to be taken seriously, surely?
    dewme said:
    "The system does not support wired backhaul" makes this system a non-starter for me.  
    Surprisingly, many homes (and this is a residential system) do not have in-wall ethernet wiring, so wired backhaul isn't a consideration for much of those users.

    That makes it an easy one to cross off the list of "not for this release" - and then it just never makes it to release ever, I'd speculate.

    The thing is, this is dumb. They have all the ports required. It should be capable of it. But then, it should also be capable of choosing a different IP range for the LAN.

    Note that they aren't the only equipment in the US that makes dumb IP range decisions. The private ranges are the 192.168, 172, and 10. ranges, and ATT's provided hardware refuses to let you move it to 10.x. 
    watto_cobra
  • Reply 12 of 13
    jingojingo Posts: 117member
    jingo said:
    If you're going to review kit of this type, why not review the Draytek range? A vast range of products with an immense spectrum of capability, and very professional functionality. Wi-Fi strength is only one aspect of a product's utility, but it seems like you are disproportionately interested in this rather than the other much more important capabilities. And no ethernet back-haul at all? They can't expect to be taken seriously, surely?
    We don't do a lot of networking reviews, and they are generally done by request. I'll add Draytek to the request list.
    Great - excellent products and they deserve to be exposed more. The AP management feature is a real winner for buildings needing WiFi coverage over a large area. And the BX2000 with built-in VOIP is a great SME product providing a very capable phone system along with internet access.
  • Reply 13 of 13
    Rayz2016Rayz2016 Posts: 6,957member
    "Initial setup is terrible on older devices. App setup starts by using Bluetooth Low Energy (BLE) to detect and transfer Wi-Fi name and password to the router." This is because iOS has no real WiFi SDK despite it being one of the top developer requests since the original iPhone SDK was released. This just causes major headaches for developers and users alike. Apple has never even said why they refuse to release a WiFi SDK but it is clear that they don't want users to scan for nearby networks. Apple must either re-embrace general purpose computing or give up on continuing to expand their market for iOS based products (the pro market for example). No one has time for this nonsense. This is a major reason why their share price is now in tatters.
    🤦🏾‍♂️
Sign In or Register to comment.