Brydge unveils redesigned keyboard with trackpad for 12.9-inch iPad Pro

Posted:
in iPad edited April 2021
Brydge is taking the wraps off its latest iPad keyboard just in time for Apple's new iPad Pros. The Brydge 12.9 Max+ features a redesigned hinge, rear protection, and a truly massive multi-touch trackpad.

Brydge 12.9 Max+
Brydge 12.9 Max+


The all-new 12.9 Max+ has done away with the signature Brydge hinges and replaced them with an integrated magnetic back panel. It takes advantage of the magnets built into the rear of iPad Pro to connect, without the need for the old clamps. It also protects your iPad at the same time.






Overall, it creates a far more streamlined setup that more closely mimics a MacBook design.

Brydge Pro+ trackpad versus Brydge 12.9 Max+
Brydge Pro+ trackpad versus Brydge 12.9 Max+


Aside from the new magnetic SnapFit design, Brydge has also significantly expanded the size of the multi-touch trackpad. It has twice the surface area of the Brydge Pro+ model.

Compared to Apple's Magic Keyboard, the Brydge 12.9 Max+ offers similar front and back protection when closed, backlit keys, and magnetic connection but has a larger trackpad and is $100 cheaper. Magic Keyboard does include an additional USB-C port for charging, however

Other features include backlit keys with three levels of brightness, a full row of iPad-specific function keys, up to three months battery life on a single charge, and a new Bluetooth mode that keeps it connected for longer while not in use.

Brydge's 12.9 Max+ fits the 3rd, 4th, and 5th generation iPad Pro 12.9-inch and is up for preorder now. It will run $249.99 with shipping beginning in June.

Comments

  • Reply 1 of 6
    thttht Posts: 5,443member
    Like this design a lot. Too bad they aren't using the Smart Connector. Too bad Apple doesn't make the Smart Connector USB and TB compatible.

    At some point in time, if the Smart Connector is TB compatible, someone can make magnetic docking pad that is connected to external monitors and peripherals. Just get the iPad Pro close, it magnetically latches in, the Smart Connector engages and voila, all your peripherals turn on.
    williamlondonwatto_cobra
  • Reply 2 of 6
    StrangeDaysStrangeDays Posts: 12,877member
    tht said:
    Like this design a lot. Too bad they aren't using the Smart Connector. Too bad Apple doesn't make the Smart Connector USB and TB compatible.

    At some point in time, if the Smart Connector is TB compatible, someone can make magnetic docking pad that is connected to external monitors and peripherals. Just get the iPad Pro close, it magnetically latches in, the Smart Connector engages and voila, all your peripherals turn on.
    Doesn't the SC just have three "pins" (contact dots)? Assuming it does not have the bandwidth for what an entire TB port does.
    watto_cobra
  • Reply 3 of 6
    thttht Posts: 5,443member
    tht said:
    Like this design a lot. Too bad they aren't using the Smart Connector. Too bad Apple doesn't make the Smart Connector USB and TB compatible.

    At some point in time, if the Smart Connector is TB compatible, someone can make magnetic docking pad that is connected to external monitors and peripherals. Just get the iPad Pro close, it magnetically latches in, the Smart Connector engages and voila, all your peripherals turn on.
    Doesn't the SC just have three "pins" (contact dots)? Assuming it does not have the bandwidth for what an entire TB port does.
    Yes, only 3 contacts, but what's stopping them from adding more contacts?

    The Smart Connector is basically purposely designed to support Apple's keyboard peripherals. So, some power and minimal I/O to support them. That's it. They are moving very very slowly on this.
    watto_cobra
  • Reply 4 of 6
    tht said:
    tht said:
    Like this design a lot. Too bad they aren't using the Smart Connector. Too bad Apple doesn't make the Smart Connector USB and TB compatible.

    At some point in time, if the Smart Connector is TB compatible, someone can make magnetic docking pad that is connected to external monitors and peripherals. Just get the iPad Pro close, it magnetically latches in, the Smart Connector engages and voila, all your peripherals turn on.
    Doesn't the SC just have three "pins" (contact dots)? Assuming it does not have the bandwidth for what an entire TB port does.
    Yes, only 3 contacts, but what's stopping them from adding more contacts?

    The Smart Connector is basically purposely designed to support Apple's keyboard peripherals. So, some power and minimal I/O to support them. That's it. They are moving very very slowly on this.
    Add an optical "contact" and it should be possible to get TB bandwidth. After all, the TB spec was designed to have an optical version at the outset.
    watto_cobra
  • Reply 5 of 6
    cpsrocpsro Posts: 3,198member
    The trackpad is off-center with respect to the home keys, just like the MacBook Pro. I suspect the base of my right thumb will create a lot of unintended touches with this keyboard, just like with the MacBook Pro.
    edited April 2021
  • Reply 6 of 6
    thttht Posts: 5,443member
    tht said:
    tht said:
    Like this design a lot. Too bad they aren't using the Smart Connector. Too bad Apple doesn't make the Smart Connector USB and TB compatible.

    At some point in time, if the Smart Connector is TB compatible, someone can make magnetic docking pad that is connected to external monitors and peripherals. Just get the iPad Pro close, it magnetically latches in, the Smart Connector engages and voila, all your peripherals turn on.
    Doesn't the SC just have three "pins" (contact dots)? Assuming it does not have the bandwidth for what an entire TB port does.
    Yes, only 3 contacts, but what's stopping them from adding more contacts?

    The Smart Connector is basically purposely designed to support Apple's keyboard peripherals. So, some power and minimal I/O to support them. That's it. They are moving very very slowly on this.
    Add an optical "contact" and it should be possible to get TB bandwidth. After all, the TB spec was designed to have an optical version at the outset.
    Yeah. Apple researched fiber optical interfaces way back when as an evolution of MagSafe, 10 years ago. At this point, I think a lot of people would be really happy if the Magic Keyboard for iPads have TB/USBC ports on both sides of the hinge. A lot of Smart Connector developers probably would be very happy if the Smart Connector data protocol was standard USB.

    A lot of iPadOS software work still to do though.
    watto_cobra
Sign In or Register to comment.