Brydge ProDock review: A vertical Thunderbolt 4 docking station for modern Macs

Posted:
in Current Mac Hardware
The new ProDock is Brydge's take on a vertical docking station that delivers the power of Thunderbolt 4 to both MacBook Pro and MacBook Air.

Brydge ProDock
Brydge ProDock


After acquiring Henge, Brydge has continued to offer minor upgrades to its well-regarded vertical docks. With the new ProDock, Brydge has delivered its first meaningful redesign bringing new features and connectivity standards.

The headlining features include Thunderbolt 4, a MagSafe-compatible charger, and support for three different Macs with a single design. While vertical docks may not suit everyone's needs, those that need them will likely be happy with what Brydge offers.



An easy setup

There's some minor setup that comes with the ProDock, you can't just open the box and instantly start using it. One of its distinguishing factors is that it can support the 2021 16-inch MacBook Pro, the 2021 14-inch MacBook Pro, or the M2 MacBook Air.

Dock inserts
Dock inserts


To support these different machines, it ships with three plastic guides -- one for each size of Mac. Each insert guide is denoted by the name of the machine it fits in the lower-right corner.

Select the guide you need and set the others aside, just in case you get another model. Brydge also provides two small hex screws and a miniature screwdriver to complete the setup.

Size switch
Size switch


Before screwing the guide into place, you need to set the top switch to correspond to the correct Mac. This adjusts where the male Thunderbolt 4 Type-C connector aligns so it can properly connect to your specific Mac.

Installing the screws
Installing the screws


Finally, you place the guide on top and tighten the two screws into place. It takes only 2 to 3 minutes to assemble and to get started using the dock with your hardware.

This setup only needs to be done once, but itdoes leave the possibility open for Brydge to expand compatibility in the future.

Depending on how the MacBook line changes in the coming years, we can see Brydge offering more guides to fit new machines, without users needing to buy a whole new vertical docking station.

Plenty of ports

The ProDock has 10 total output ports, dispersed on three different sides of the device. There are some wins here as well as a few misses.

Left side ports
Left side ports


On the left, we have a USB 3.2 Gen 1 Type-C port that is capable of 5.5W of power and 5Gbps of data. It's partnered with a full-sized SD card reader on its right.

Right side ports
Right side ports


Flipping the dock around, there's a single 3.5mm audio jack. The side placement of the card reader, USB port, and headphone jack helps to keep them readily available without moving the dock around.

Depending on your desk placement, you may still end up with one of the sides facing away from you and the ports still out of reach. Placing them directly on the front would have made them more accessible, but the newfound wireless charger rules out that option.

Rear ports
Rear ports


It has three Thunderbolt 4 downstream ports and three USB 3.2 Gen 2 Type-A ports that can deliver up to 5.5W of power. The last port is a gigabit Ethernet port.

Brydge provides a 135W power adapter in the box that plugs in on the back of the unit via a standard barrel connector. At maximum power draw, the ProDock can deliver 98W of power to your Mac.

Overall, this is a serviceable port selection though the speed on the side USB-C port is disappointing. We'd love to have seen a Type-C port that could deliver at least 18W of juice rather than a measly 5W.

There is also no MicroSD card reader, meaning you need to keep an adapter handy if you use the smaller media format.

These aren't insurmountable issues as the rear-facing Thunderbolt 4 ports deliver more power if needed, and an adapter can be merely left in place semi-permanently. It's just slightly less convenient.

Should you buy the Brydge ProDock?

The Brydge ProDock is a great, if niche, device. Not everyone needs a vertical docking station. They instead would utilize the screen on their laptop alongside a secondary display.

Sometimes, it's more convenient to use just the external monitors. Our currently prevailing setup has our Mac closed in clamshell mode while using a pair of external displays, including Apple's Studio Display.

Charging pad
Charging pad


The new charging pad is a welcome addition here too compared to previous versions. That space was largely already occupied by the base of the stand, and rather than leaving it to go unused, Brydge has made it a useful feature.

The charging puck is raised in the center and is covered in soft silicone. Raising it allows newer phones to sit flat, such as the iPhone 14 Pro and its massive camera bump.

Placing phone on charger
Placing phone on charger


Brydge put magnets in the wireless charger, helping maintain proper alignment when used with an iPhone that supports MagSafe. The magnet feels a little weak, though it's enough to help you know where to position the phone.

It outputs up to 15W of power, though iPhones will be limited to 7.5W as it's a Qi charger, not a MagSafe charger.

ProDock
ProDock


Brydge seems to have thought of all the details with this dock, including small adhesive covers for the side of your Mac to prevent any scratches as you place the machine in.

Thunderbolt 4 is a solid choice here as well. The key difference from Thunderbolt 3 is that it allows for multiple downstream Thunderbolt ports.

For video production, this can be crucial. Thunderbolt devices can be daisy chained together but it isn't a good idea to daisy chain storage devices, which video editors may desire.

MacBook Air supports one external display
M2 MacBook Air supports one external display


We were able to connect a CFExpress card reader, two external SSDs, a large hard drive array, and two displays all over Thunderbolt, as well as a few ancillary devices when testing the Brydge ProDock.

Closeup
ProDock closeup


There may be a few minor grievances with the ProDock but it's a well-designed accessory that can help boost productivity and connectivity all while saving space.

You'll pay for the privilege though. Thunderbolt 4 accessories are still quite expensive and most solid Thunderbolt 4 docks are similarly priced, coming in near $400.

Pros

  • Compact, spacing-saving design

  • Anodized aluminum body

  • 10 versatile ports

  • Thunderbolt 4 with multiple downstream Thunderbolt ports

  • Fits all newest portable Macs

  • Possibility to support future Macs

  • Easily-accessible wireless charger with magnetic alignment

  • Easy insertion and removal

Cons

  • Slow charging speeds on side USB port

  • Emerging tech isn't the cheapest

  • Not real MagSafe charger

Rating: 4 out of 5

Where to buy

You can preorder the Brydge ProDock Thunderbolt 4 docking station directly from Brydge for $399 with shipping beginning in late January.

Read on AppleInsider

Comments

  • Reply 1 of 9
    JP234 said:
    So basically spend $400 plus $300-$500 (monitor) to turn my MacBook into an iMac.
    Who comes up with these brilliant ideas?
    Ever try setting up an iMac on an airplane? It’s slightly easier now that many airlines have 110v power outlets, but still far more convenient to just use a MacBook…
    watto_cobraentropys
  • Reply 2 of 9
    Can one of the Thunderbolt 4 ports be used as a USB 3.2 Gen 2 (or USB 4.0?) port? Wasn’t that a premise of Thunderbolt 4.0? 
    watto_cobra
  • Reply 3 of 9
    Doesn’t the side USB port actually support 10Gbps?
    It has a little 10 written next to it on the image but the text in your article says 5Gbps..
    watto_cobra
  • Reply 4 of 9
    AniMillAniMill Posts: 156member
    I’d say 3 out of 5: it’s lack of 10GBe is sinful. That’s not “pro” without it - especially at its price. I was a big fan and proponent of their original Docks: they were simple and tapped the multiple ThunderBolt USB-C ports and made them easily usable for any accessory we needed. Now we’re forced to buy all these other ports with limited throughput. Yes it’s sexy, but it’s just to overdone for my needs. I wish they’d still offered the previous design for the new MBP M1 designs. 😔
    watto_cobra9secondkox2
  • Reply 5 of 9
    Got the predecessor stand for my 2019 16" Intel Mac Book Pro. That was the best I could initially do to free up some desk space. So I now have received this new unit that supports both the 2021 14" and 16" MacBook Pros along with a M processor Series MacBook Air.  I have an 2020 M1 MBAir and the USB-C Ports are in the same location as on then M2 version. I don't what will work but a single monitor comes to mind unless it has the M2 chip.
    edited January 2023 watto_cobra
  • Reply 6 of 9
    9secondkox29secondkox2 Posts: 2,719member
    $400 and they can’t even match the color of my MacBook? They’ve regressed 

    the previous design was so much better. This looks like a PC accessory. 
    edited January 2023
  • Reply 7 of 9
    I don’t understand the benefit of this type of dock: forcing you to ditch a screen just to be able to use it in clamshell mode…
    Why not making a stand to put my opened MacBook on and have al this docking features built into the stand? Adding a short retractable Thunderbolt 4 cable to dock it and voilà: two screens with your MacBook ergonomically lifted up and running! Add that wireless phone charger underneath the stand and I’d be an exciting dock!
    JP234
  • Reply 8 of 9
    On the ever shrinking flip down surface from the seat in front of you in economy and economy plus (too small to be called a table), I have watched the area that could support a 15" MacBook Pro and a drink be sized down to barely support my M1 iPad 11 with Bridge keyboard. And that is before the person in front reclines......

    Business Class and First Class still support the 17 and larger laptops with a side table for drinks.

    Also, in the cheap seats, there is now usually just one shared power point. Thus, a long lasting battery is more imperative than ever.
Sign In or Register to comment.