"You have inserted a disk containing no volumes that Mac OS X can read..."
ERROR MESSAGE: "You have inserted a disk containing no volumes that Mac OS X can read..."
MAXTOR Firewire HD
733mhx G4
OS X 10.3.9
i have had a Maxtor firewire hard drive running as a sort of filiing cabinet for the past year. i connected 2 other firewire hard drives to the system recently and since then i cannot access my Maxtor HD.
what can i do to rescue my drive and files?
MAXTOR Firewire HD
733mhx G4
OS X 10.3.9
i have had a Maxtor firewire hard drive running as a sort of filiing cabinet for the past year. i connected 2 other firewire hard drives to the system recently and since then i cannot access my Maxtor HD.
what can i do to rescue my drive and files?
Comments
same thing.
i tried hooking it up to my powerbook-
same thing.
i just dug out a my Norton SystemWorks 2.0 disk.
i guess i should plug in the drive
and then reboot from the disk.
but if the disk isn't being recognized how do i get it diagnosed?
hmm, thats going to have to be latere tonight
i've still got work to do.
i hope this old version of NORTON is the trick.
i know i haven't used it in over a year.
any input appreciated.
tia
and the warning about a disk that cant be read comes up and forces me to either initialize or eject the disk.
so i eject the disk and go to DiskDoctor and ask it to "Show Missing Disks" it scans the busses but finds nothing!?!
what now?
Originally posted by bluesigns
i booted from the NORTON SystemWorks CD
and the warning about a disk that cant be read comes up and forces me to either initialize or eject the disk.
so i eject the disk and go to DiskDoctor and ask it to "Show Missing Disks" it scans the busses but finds nothing!?!
what now?
It could be the controller for the external case that has failed. Buy a cheap external case, and try putting the drive in it. If you still have the same problems, then the drive may be dead.
It could also be a bad firewire cable. Try using a different cable to connect it.
At that point, you've eliminated the failure on the computer end (tried it on two computers). You've eliminated failure on the way to the device. You've also eliminated failure of the connection (the controller) to the device. The only thing left that could be the problem is the device.
i finally got it to recognize the "Missing Disk" by hot plugging the drive after i booted from the CD and already had DiskDoctor opened on the the desktop.
its examining the drive now.
i think its been over an hour and its crawling along.
it was going so slow at first - i thought it crashed.
looks like it will be running all night.
when i ran Disk Doctor there were some problems found.
it fixed 2 and stopped on the 3rd and said i should start again.
now as soon as i launch Disk Doctor it says:
Major Error; No Partitions found...
I work in a workshop, and we refuse to buy Maxtor drives because they've had by far the worst failure rate we've had from any manufacturer.
DISKWARRIOR.
Originally posted by Mike Fishcake
Probably because it's a Maxtor drive TBH.
I work in a workshop, and we refuse to buy Maxtor drives because they've had by far the worst failure rate we've had from any manufacturer.
Really? I always thought Maxtor were on of the better manufacturers?
That's concerning...