6.) and last but certainly not least - cut and paste
I seem to remember an Apple patent from a year or two ago on using a ceramic enclosure for portables. It would allow for improved signal strength, scratch resistance etc. I wonder ?
Oh I can't wait. I hope they sell it at Best Buy the day it comes out. I hate Best Buy, but my boss gave me a $300 gift card for Christmas and an iPhone is the only thing they sell that I would want to buy
Its never coming, get over it. Clearly there's no technical reason why it couldn't have been in iPhone 1.0, let alone 3.0, so I think we can safely say that the iPhone will never have MMS.
Quote:
3.) Video recording along with improved camera.
Would be nice I admit!
Quote:
4.) Expandable memory
would be nice, but its not going to happen.
Quote:
5.) Flash- both for the camera and for Safari
The former would be nice, the latter I don't want. Most of what is done in flash can be done in CSS/Javascript/HTML. Video is the one exception, but I'd prefer Apple push for HTML5 and its standard video support.
Quote:
6.) and last but certainly not least - cut and paste
Well the only hardware changes I would like seen would be:
-Forward facing camera for iChat AV
-Higher end Digital Camera on back to help with motion blur and low light environments
-"N" Wireless chip. I'm finding a lot of "N" only networks that I cannot connect to.
I can see the first two happening if apple feels like upgrading the camera and if att lets ichat video work on their network. The wireless N I don't think we will see that. I am not a wireless card expert but so far the N cards that I have seen have generated far more heat then g spec cards. Has any chip manufacturer been demoing a low power mobile n chipset?
The TG01 does have a very impressive display, its incredibly thin, and bosts A2DP
Of course it runs an OS where you have to go into settings to set processor speed for improved performance OR battery life. I hope the next IPhone is smart enough to figure out optimum processor speed, however thin design, A2DP, and an even better display are on my wish (hope) list
As much as I would love to get a new iphone there are two things holding me back. The first is that where I live there is no 3g coverage and probably will not be for some time and I refuse to pay additional monies for a service I can not use. The second is that I will not replace my first gen iphone with one that has significantly less battery life then my current one. With many people griping about the 3g phones short battery life how can apple up the specs on the phone without ending up with a 1 hour battery life. \
I seem to remember an Apple patent from a year or two ago on using a ceramic enclosure for portables. It would allow for improved signal strength, scratch resistance etc. I wonder ?
I remember this also. I emailed Apple concerning this. I don't know how cost feasible this is, BUT- if Apple were to adopt this in the manufacture of their iPhone/Touch enclosures, man no one would complain of scratches. I own a Rado watch, which uses that ceramic technology. The only thing that can scratch it are diamonds (they can scratch almost anything) and carborumdum, which is found in concrete.) It would really be great if Apple made use of this!
Besides all the obvious features that we all want such as the MMS/pics, better camera w/ flash, adobe flash/MS Silverlight for Safari, more RAM, bigger hard drive, better scratch resistant screens, etc., what Apple needs to do is not repeat the clusterf**k that was last year in how they sold the phone. They should definitely allow everyone to be able to order online as well as going to the brick & mortar stores. They should keep the online pre-approval/credit check forms and as long as you qualify, you can place an order if you can't physically make it to the store.
Last year's process was idiotic, time consuming and just outright annoying. Even though they make great products, they need to stop alienating the consumers who do purchase their products.
Well, it better be thinner, faster and quicker... and larger screen...
Toshiba New Touch phone looks awesome.....
Well, the Toshiba TG01 is lovely thin at 9.9mm (compared to the iPhones 12.3mm) but it's friggin' huge! No thanks. Thinness not at the price of hugeness. Many of my friends already complain about the iPhone being too big. Even bigger? Are you serious?
Although a higher-resolution screen would be nice in the next iPhone.
I wonder how much of a hassle this would be for game developers. Would old games be upscaled (and blurry) on a higher res iPhone? Although I suppose most developers would welcome the ability to sell their games (in a high-res version) again to the same user...
Quote:
Originally Posted by Jagil
Unibody!
Uhm, no.
As much as I'd love to get my aluminum iPhone 2.5G back, Apple had to move to plastic for signal reception. Aluminum works too well as radio frequency shield. And unlike MacBooks which have a huge plastic hinge where all the antennas are located, the iPhone hasn't room for that. Half the case would have to be plastic. And that looks odd.
Well the only hardware changes I would like seen would be:
-"N" Wireless chip. I'm finding a lot of "N" only networks that I cannot connect to.
I thought 802.11n was backwards compatible with 'g'....no? Also, given the processor speed of the iPhone, what advantage would there been in a larger pipe coming in? The extra range would be good.
I thought 802.11n was backwards compatible with 'g'....no? Also, given the processor speed of the iPhone, what advantage would there been in a larger pipe coming in? The extra range would be good.
802.11n is backwards compatible, however it is also possible to make a network that isn't backwards compatible. Whenever a 802.11g device is on an 802.11n network, the network slows down. That's the reason I have two wireless networks: one for my phone (802.11g) and one for my computers (802.11n)
I thought 802.11n was backwards compatible with 'g'....no? Also, given the processor speed of the iPhone, what advantage would there been in a larger pipe coming in? The extra range would be good.
Some people want to get 2.4Ghz network devices off the LAN. That spectrum is congested and will never perform like it can.
I'm going to move to a 5Ghz network only and I've already bought a DECT 6 phone system to further stay away from 2.4Ghz.
The iPhone certainly needs to go 802.11n if only for ease of network sake.
Some people want to get 2.4Ghz network devices off the LAN. That spectrum is congested and will never perform like it can.
I'm going to move to a 5Ghz network only and I've already bought a DECT 6 phone system to further stay away from 2.4Ghz.
The iPhone certainly needs to go 802.11n if only for ease of network sake.
Would like to see faster 3G speeds, although do not believe really a function of the phone, others have proven otherwise. Wi Fi is fast.
Would like to see FLASH
Turn by Turn GPS with option LOUD back or bottom LARGER speaker used for GPS
Cut and Paster
Video Conferencing on WiFi and 3G
Free Tethering
You know there has to be an update. Millions will be in year 2 of their contract and can dump the phone. The good news is that we should see significant improvements due to this combined with the Palm Pre price coming in at a possible $119 price point.
Also wondering what type of deal they will have for present iPhone users (less than 2 years), as I remember when the iPhone 3G came out, anyone with an iPhone could upgrade, just had to resign for a new two year contract. Hopefully you can keep the old phone in case something happens to it.
Would also like to see insurance for the phone.
Hoping that the PRE PALM comes out ROCK'n soon so we have some competitiveness.
This is a surprise? Does anyone think Apple could get away with not updating the iPhone a year after the last update? The one change that could make me buy one is if AT&T isn't the sole carrier anymore. When does Apple's exclusivity contract with AT&T expire again?
Comments
1.) Higher grade of scratch resistant plastic.
2.) MMS - text and pics
3.) Video recording along with improved camera.
4.) Expandable memory
5.) Flash- both for the camera and for Safari
6.) and last but certainly not least - cut and paste
I seem to remember an Apple patent from a year or two ago on using a ceramic enclosure for portables. It would allow for improved signal strength, scratch resistance etc. I wonder ?
You keep saying Apple uses cheap plastic. But you never qualify your knowledge of plastics, or the difference between durable and cheap plastic.
1.) Higher grade of scratch resistant plastic.
1.) Higher grade of scratch resistant plastic.
Its Transparent Aluminum I'm holding out for.
2.) MMS - text and pics
Its never coming, get over it. Clearly there's no technical reason why it couldn't have been in iPhone 1.0, let alone 3.0, so I think we can safely say that the iPhone will never have MMS.
3.) Video recording along with improved camera.
Would be nice I admit!
4.) Expandable memory
would be nice, but its not going to happen.
5.) Flash- both for the camera and for Safari
The former would be nice, the latter I don't want. Most of what is done in flash can be done in CSS/Javascript/HTML. Video is the one exception, but I'd prefer Apple push for HTML5 and its standard video support.
6.) and last but certainly not least - cut and paste
Amen brother.
Well the only hardware changes I would like seen would be:
-Forward facing camera for iChat AV
-Higher end Digital Camera on back to help with motion blur and low light environments
-"N" Wireless chip. I'm finding a lot of "N" only networks that I cannot connect to.
I can see the first two happening if apple feels like upgrading the camera and if att lets ichat video work on their network. The wireless N I don't think we will see that. I am not a wireless card expert but so far the N cards that I have seen have generated far more heat then g spec cards. Has any chip manufacturer been demoing a low power mobile n chipset?
Jim
Of course it runs an OS where you have to go into settings to set processor speed for improved performance OR battery life. I hope the next IPhone is smart enough to figure out optimum processor speed, however thin design, A2DP, and an even better display are on my wish (hope) list
2. Cut and paste
3. Better Camera
4. Maybe MMS capability
Other than these I have no complaints about the phone. Some of AT&T's coverage in my area is spotty though.
So, like lipstick on a pig then.
A Sarah Palin Reference? : Just kidding.
As much as I would love to get a new iphone there are two things holding me back. The first is that where I live there is no 3g coverage and probably will not be for some time and I refuse to pay additional monies for a service I can not use. The second is that I will not replace my first gen iphone with one that has significantly less battery life then my current one. With many people griping about the 3g phones short battery life how can apple up the specs on the phone without ending up with a 1 hour battery life. \
If the iPhone doesn't have Firewire I will never buy another Apple product again.
I guess this is goodbye then?
I seem to remember an Apple patent from a year or two ago on using a ceramic enclosure for portables. It would allow for improved signal strength, scratch resistance etc. I wonder ?
I remember this also. I emailed Apple concerning this. I don't know how cost feasible this is, BUT- if Apple were to adopt this in the manufacture of their iPhone/Touch enclosures, man no one would complain of scratches. I own a Rado watch, which uses that ceramic technology. The only thing that can scratch it are diamonds (they can scratch almost anything) and carborumdum, which is found in concrete.) It would really be great if Apple made use of this!
Last year's process was idiotic, time consuming and just outright annoying. Even though they make great products, they need to stop alienating the consumers who do purchase their products.
Well, it better be thinner, faster and quicker... and larger screen...
Toshiba New Touch phone looks awesome.....
Well, the Toshiba TG01 is lovely thin at 9.9mm (compared to the iPhones 12.3mm) but it's friggin' huge! No thanks. Thinness not at the price of hugeness. Many of my friends already complain about the iPhone being too big. Even bigger? Are you serious?
Although a higher-resolution screen would be nice in the next iPhone.
I wonder how much of a hassle this would be for game developers. Would old games be upscaled (and blurry) on a higher res iPhone? Although I suppose most developers would welcome the ability to sell their games (in a high-res version) again to the same user...
Unibody!
Uhm, no.
As much as I'd love to get my aluminum iPhone 2.5G back, Apple had to move to plastic for signal reception. Aluminum works too well as radio frequency shield. And unlike MacBooks which have a huge plastic hinge where all the antennas are located, the iPhone hasn't room for that. Half the case would have to be plastic. And that looks odd.
If the iPhone doesn't have Firewire I will never buy another Apple product again.
Snaps to that!
Well the only hardware changes I would like seen would be:
-"N" Wireless chip. I'm finding a lot of "N" only networks that I cannot connect to.
I thought 802.11n was backwards compatible with 'g'....no? Also, given the processor speed of the iPhone, what advantage would there been in a larger pipe coming in? The extra range would be good.
I thought 802.11n was backwards compatible with 'g'....no? Also, given the processor speed of the iPhone, what advantage would there been in a larger pipe coming in? The extra range would be good.
802.11n is backwards compatible, however it is also possible to make a network that isn't backwards compatible. Whenever a 802.11g device is on an 802.11n network, the network slows down. That's the reason I have two wireless networks: one for my phone (802.11g) and one for my computers (802.11n)
I thought 802.11n was backwards compatible with 'g'....no? Also, given the processor speed of the iPhone, what advantage would there been in a larger pipe coming in? The extra range would be good.
Some people want to get 2.4Ghz network devices off the LAN. That spectrum is congested and will never perform like it can.
I'm going to move to a 5Ghz network only and I've already bought a DECT 6 phone system to further stay away from 2.4Ghz.
The iPhone certainly needs to go 802.11n if only for ease of network sake.
Some people want to get 2.4Ghz network devices off the LAN. That spectrum is congested and will never perform like it can.
I'm going to move to a 5Ghz network only and I've already bought a DECT 6 phone system to further stay away from 2.4Ghz.
The iPhone certainly needs to go 802.11n if only for ease of network sake.
Would like to see faster 3G speeds, although do not believe really a function of the phone, others have proven otherwise. Wi Fi is fast.
Would like to see FLASH
Turn by Turn GPS with option LOUD back or bottom LARGER speaker used for GPS
Cut and Paster
Video Conferencing on WiFi and 3G
Free Tethering
You know there has to be an update. Millions will be in year 2 of their contract and can dump the phone. The good news is that we should see significant improvements due to this combined with the Palm Pre price coming in at a possible $119 price point.
Also wondering what type of deal they will have for present iPhone users (less than 2 years), as I remember when the iPhone 3G came out, anyone with an iPhone could upgrade, just had to resign for a new two year contract. Hopefully you can keep the old phone in case something happens to it.
Would also like to see insurance for the phone.
Hoping that the PRE PALM comes out ROCK'n soon so we have some competitiveness.
Amen to that