Review: Kanex iAdapt is the best iPad Pro USB-C hub & better with iPadOS

AppleInsider · July 18, 2019 3:56PM

The Kanex iAdapt USB-C hub is designed to be the go-to solution for iPad Pro power users, and will get even better in the fall.

The iAdapt iPad Pro USB-C Hub

We've been searching for the best USB-C hub for our iPad Pro since we got our hands on it in the fall of 2018. It has taken many months, but manufacturers are finally stepping up and releasing some very compelling solutions. The latest we picked up to test out is the iAdapt by Kanex.

Thoughtful design

The iAdapt is a USB-C hub with the usual offering of ports that feels designed first and foremost for an iPad. A lot of what we've seen to date from Satechi and Hyper are in essence a hub for a Mac that has been slightly repurposed for the iPad Pro.

Subscribe to AppleInsider on YouTube

Hyper added a small plastic grip that adds stability to the device, but it still largely looks and feels like a Mac hub. There isn't anything specifically wrong with that and those hubs work great, but Kanex took it one step further.

Kanex's iAdapt fits on the corner of the iPad Pro and perfectly matches the curve of Apple's tablet. It connects with a cord rather than a rigid adapter that can get loose when frequently connecting and removing devices. By using a cord instead, whenever you attach accessories to the hub, it completely removes the strain on the connector itself.

The magnetic spacer allows iAdapt to work with or without the Smart Keyboard Folio

It works with or without the Smart Keyboard Folio by way of a magnetic spacer. If the Smart Keyboard Folio is on, just remove the spacer and slide it over the corner of the iPad. It fits securely and snugly, more-so than any other hub we've tried.

The Kanex iAdapt has a low profile

From the front, it is also nearly completely hidden. You just see a plastic bezel around that top right corner and the USB-C cable sticking out of the side of the device. This is also more preferable to other designs that are a bit unwieldy and stick out far too much.

Port selection

The Kanex iAdapt has a headphone jack, USB-C port, SD and MicroSD card readers, and a 4K HDMI output on the side

There are six ports available on the Kanex iAdapt. Starting from the bottom, we have a 3.5mm audio jack, followed by a USB-C port, a microSD card reader, an SD card reader, a 4K HDMI, and a USB-A port on the top.

The USB-C port can be used to power your iPad or to connect external storage devices, which is really the only problem we have with the hub. We wish there was another USB-C port so we can connect accessories and charge at the same time instead of having to choose between the two.

The top USB-A port on the Kanex iAdapt USB-C hub

That top USB-A port can also be difficult sometimes. If you have a short cable, it going straight up could be awkward.

Newfound potential

One of the most exciting things about this hub is the newfound potential of iPadOS/iOS 13.

Accessories connecting to the Kanex iAdapt hub

With this update, iPad Pro will be able to access external media from within the Files app and any other apps that support the "Browse" functionality of iOS storage.

Plug in a thumb drive, hard drive, or camera media and you can instantly access it and manipulate the files as you need to.

We have been testing the iOS 13 beta and it has worked extremely well for us and we tested different hard drives and thumb drives with the iAdapt hub with nary an issue.

With the launch of this update this fall, we can see many professionals clamoring for hubs such as this.

Rating: 4.5 out of 5

Where to buy

The Kanex iAdapt USB-C Hub is available from B&H for $99.95.

gutengel · July 18, 2019 4:20PM

The cable is not removable, that's the failure point of the dongle.

melgross · July 18, 2019 4:52PM

It looks good, but, boy, is it thick. I normally have my iPad flat, and this will really knock it around. I have a couple of hubs that I bought just to play around with them. No name manufacturers, at least, names we don’t see written about, from China. They work well with my iPad with iPadOS, though they don’t clip on. They both have short cords, so they dangle. But the point is that they work. I don’t understand why this one is so thick.

edited July 2019

paisleydisco · July 18, 2019 5:30PM

Hideous.

jdiamond · July 18, 2019 5:50PM

So glad you wrote this article - glad to find out about this hub. Certainly looks less "Hideous" to me than the other hubs out there. You missed two important features of the hub, though:

1) You can hook a hard drive up to the USB-A port and charge at the same time. There is no penalty - it reads and writes files at the same speed, whether on the USB-C port or the USB-A port, both at 5 gigabits (USB 3.0 speeds). And USB-C to USB-A cables are ubiquitous.

2) It not only supports HDMI, but the USB-C port also supports Displayport 1.2 with HDCP! (But only up to Full-HD resolution.) . But now you really can't charge at the same time.

yojimbo007 · July 18, 2019 6:57PM

Cool.. like how it firmly attaches to the corner.... I bought the hyper one when i read about it here... port wise its identical.. its a nice unit. But this one seems to have a tighter fit and better position. If i did not have the Hyper i think i would have chosen this one...

bloggerblog · July 18, 2019 7:24PM

At this point just buy a laptop! Oh wait, that too has only one port type.

melgross · July 18, 2019 8:12PM

Eventually, most of these other ports will disappear, particularly the old USB ports, of which there seems to be a never ending video variety. When usb first came out, in the late ‘90’s, we were told that a major advantage was that it would sweep away a bunch of incompatible port types.

it did, for about a year. It now we have more different USB port types than all of the others it. Swept away in the beginning. And one of the worst things about is that some of the ports look almost exactly like others.

raoulduke42 · July 18, 2019 8:56PM

jdiamond said:

So glad you wrote this article - glad to find out about this hub. Certainly looks less "Hideous" to me than the other hubs out there. You missed two important features of the hub, though:

1) You can hook a hard drive up to the USB-A port and charge at the same time. There is no penalty - it reads and writes files at the same speed, whether on the USB-C port or the USB-A port, both at 5 gigabits (USB 3.0 speeds). And USB-C to USB-A cables are ubiquitous.

2) It not only supports HDMI, but the USB-C port also supports Displayport 1.2 with HDCP! (But only up to Full-HD resolution.) . But now you really can't charge at the same time.

Pretty hep that the USB-c port routes DisplayPort signals through it, but I still can't find a hub that will power/charge a single port MacBook (or new iPad Pros now I suppose) AND support a USB-c portable display (with native DP, not "DisplayLink" lameness). Is my google-fu just weak? Or does such a product simply not exist yet?

melgross · July 19, 2019 12:40AM

raoulduke42 said:

jdiamond said:

So glad you wrote this article - glad to find out about this hub. Certainly looks less "Hideous" to me than the other hubs out there. You missed two important features of the hub, though:

1) You can hook a hard drive up to the USB-A port and charge at the same time. There is no penalty - it reads and writes files at the same speed, whether on the USB-C port or the USB-A port, both at 5 gigabits (USB 3.0 speeds). And USB-C to USB-A cables are ubiquitous.

2) It not only supports HDMI, but the USB-C port also supports Displayport 1.2 with HDCP! (But only up to Full-HD resolution.) . But now you really can't charge at the same time.

Pretty hep that the USB-c port routes DisplayPort signals through it, but I still can't find a hub that will power/charge a single port MacBook (or new iPad Pros now I suppose) AND support a USB-c portable display (with native DP, not "DisplayLink" lameness). Is my google-fu just weak? Or does such a product simply not exist yet?

It’s a good question. I’ve got hubs that support charging and various outputs including graphics, but not with dp. They all support 4K hdmi. There’s one that supports TB 3 in additional to 2 usbs gen 1 ports, and others, including USB C charging. Maybe the TB 3 will support the TB video standard. It’s on Amazon. It’s called Purgo. About $52.

edited July 2019

soli · October 25, 2019 1:32PM

melgross said:

It looks good, but, boy, is it thick. I normally have my iPad flat, and this will really knock it around. I have a couple of hubs that I bought just to play around with them. No name manufacturers, at least, names we don’t see written about, from China. They work well with my iPad with iPadOS, though they don’t clip on. They both have short cords, so they dangle. But the point is that they work. I don’t understand why this one is so thick.

Can you post a link to one of the others you have? I'm looking at this one and I don't know where they could remove bulk off the hub section of this device. It seems inline with all other hubs I've seen. The only extra "bulk" I'm seeing is from the additional thickness needed to slide over the edge of the iPad Pro, which I don't think is fair to count as part of being unwieldily thick.

pana_zyde · May 2, 2020 4:36PM

From the Kanex web site:

„HDMI:

2K/60Hz on iPad Pro; 4K/30Hz on MacBooks“

So, is it really able to use a 4K display at full size?