Hands on: Twelve South Backpack shelf for Studio Display

Jump to First Reply
Posted:
in Current Mac Hardware edited March 2023
Twelve South introduced an updated version of its Backpack, a shelf that takes advantage of the wire guide in Apple's display stands, and it is now compatible with the Studio Display.

Backpack on the Studio Display
Backpack on the Studio Display


While we say "updated," we really mean a new compatibility addition. This is the same shelf, down to the white matte color found on the iMac version, but it comes with a new clip needed to fit the Studio Display wire guide.

In fact, this shelf is sold with both the Studio Display and iMac adapters, so customers don't need to worry about picking the right one. Since AppleInsider already reviewed the iMac version, we'll focus on how it fits in with the Studio Display.

The plastic saddle for the wire guide slides into place easily, and a second piece clips on to secure it. A small lip faces outward for the shelf to slide into, and that's it -- it's a shelf on the back of your display.

The shelf can only support three pounds, which would be difficult to exceed without stacking several devices on it. A velcro strap that looks similar to an Apple Watch band is included to help secure drives or docks in place.

Hubs with ports on multiple sides might struggle to fit
Hubs with ports on multiple sides might struggle to fit


The negatives AppleInsider pointed out in the original review are still present. The velcro strap is too short to be of any use after adding a couple of devices, and the coated ties for cable management feel cheap.

However, these negatives aren't deal breakers for this excellent shelf. We can note that the powder coating appears to be even and doesn't leave the metal exposed in locations like on the previous model. We did find a single hole that was missing some paint, though.

We're quite happy with this shelf. The Twelve South Backpack with Studio Display support is perfect for getting a drive or hub up out of sight.

Get the Twelve South Backpack for $44.95.

Read on AppleInsider

Comments

  • Reply 1 of 7
    22july201322july2013 Posts: 3,808member
    It's innovative. Is it patented? Is it sold in the Apple online Store?
     0Likes 0Dislikes 0Informatives
  • Reply 2 of 7
    lkrupplkrupp Posts: 10,557member
    $45? Really
    coolfactor
     1Like 0Dislikes 0Informatives
  • Reply 3 of 7
    It’s probably worth noting that this only fits the Studio Display with the tilt-adjustable stand. It will not work with the tilt & height-adjustable stand.
    watto_cobraFileMakerFeller
     1Like 0Dislikes 1Informative
  • Reply 4 of 7
    coolfactorcoolfactor Posts: 2,373member

    I know it's a free marketplace, but $45? This is as bad as phone cases being sold for $60+ dollars. The company is laughing at its suckers customers.
     0Likes 0Dislikes 0Informatives
  • Reply 5 of 7
    omasouomasou Posts: 650member
    I use these to mount SSDs and hubs to the back of my monitors.


     0Likes 0Dislikes 0Informatives
  • Reply 6 of 7
    dewmedewme Posts: 5,987member
    omasou said:
    I use these to mount SSDs and hubs to the back of my monitors.


    The downside with these adhesive mounts is the difficulty of cleanly removing/swapping-out the device. They also make 2-piece versions with Velcro on both pieces, which makes it easier to swap things out. Of course you can’t be squeamish about having sticky residue on the back of your monitor and the attached device should you need to permanently separate the pieces. But there are cleaners that will remove the residue. Just don’t try to scrape the and off with a metal tool. 

    The biggest issue I have with the shelf + device arrangement shown in the article is that the hub would be 100% more usable if it were mounted vertically or rotated 90 degrees so you can see the ports when peering behind the monitor. I suppose they didn’t want to show the hub hanging off the edge of the shelf. I would go with a vertical Velcro mount if faced with the same scenario. 
     0Likes 0Dislikes 0Informatives
  • Reply 7 of 7
    omasouomasou Posts: 650member
    dewme said:
    The downside with these adhesive mounts is the difficulty of cleanly removing/swapping-out the device. They also make 2-piece versions with Velcro on both pieces, which makes it easier to swap things out. Of course you can’t be squeamish about having sticky residue on the back of your monitor and the attached device should you need to permanently separate the pieces. But there are cleaners that will remove the residue. Just don’t try to scrape the and off with a metal tool. 

    The biggest issue I have with the shelf + device arrangement shown in the article is that the hub would be 100% more usable if it were mounted vertically or rotated 90 degrees so you can see the ports when peering behind the monitor. I suppose they didn’t want to show the hub hanging off the edge of the shelf. I would go with a vertical Velcro mount if faced with the same scenario. 
    When I need to remove them the foam tears and I use my thumb to roll off the adhesive on each side. That said, I'm not removing and replacing unless the SSD, hub or monitor dies.
    edited March 2023
     0Likes 0Dislikes 0Informatives
Sign In or Register to comment.