nothing
About
- Username
- nothing
- Joined
- Visits
- 0
- Last Active
- -
- Roles
- member
- Badges
- 0
- Posts
- 23
Reactions
Comments
-
There's no problem at all using an FC switch with a single Xserve and 2 Xserve RAIDs. That config is pretty much plug-and-play. It only gets a bit tricky when you want to have more than one Xserve connected to the same switch as an Xserve RAID... yo…
-
Ok - a revision.... Thinking about it - I would only recommend RAID 50 for video production... in other words, data that can be worked with and moved off-line relatively quickly. It's fast, but for high availability - it's not so good, because if…
-
A loaded 14 drive Xserve RAID will be seen, by default, as 2 1.4 terabyte arrays. If you wanted it to be seen as one large volume, then you would create a software stripe of the arrays to yield one large volume - you get 2.8 terabytes. This is t…
-
(reply to previous poster) I'm sure part of it had to do with using off-the-shelf parts that could be modified to fit the purpose... but redundancy also plays in here. While the controllers are the only non-redundant part when it comes to cont…
-
Quote: Originally posted by dobby If they update the XRaid perhaps they can make it so I can run RAID 5 across the entire 14 disks instead of only 7. False advertising from Apple as it cannot give me a single 3TB partition which is what you woul…
-
Sorry this took awhile, I've been really, really busy. The thing to keep in mind with PPTP is that the username used to connect to the PPTP server must be in the local netinfo domain, not the LDAP directory. That is the #1 pitfall. The symptom is…
-
in 10.3, you shouldn't have to edit the hostconfig file to enable VPN properly. I can definitely help... it's really quite easy, as long as you know the pitfalls. Just give me some more info... what kind of VPN are they trying to set up? PPTP or …
-
I'll see if I can run this down for you... In terms of features, here's the ranking: 1. ARD2 2. Timbuk2 3. VNC ARD is primarily for managing many computers... managing, not just remote controlling. If you just want to remote control a mac…
-
http://www.hmug.org/man/8/failoverd.html
-
Quote: Originally posted by cadz Any clue how to enable jumbo frames (MTU 9000) in OSX. I was told by Apple the G5 internal gigabit interface "does not support jumbo frames". Put an Asante card in two machines, which does support MTU's of 9000 an…
-
The best post so far - especially for the originator of this thread - BY FAR has been Kickaha. I'm an extremely novice programmer at this point - I taught myself applescript studio a while ago, it got my feet wet again, and I taught myself Obj-C.…
-
Short answer is: yes. Jaguar Server actually supports this now, but only VPN via CHAP, not iPSec. I think www.afp548.com or www.macosxhints.com will tell you how to set it up. It's kind of a "secret feature" that never made it into any official d…
-
In order to have things show up in /Network, you need a few things: 1. Mac OS X Server somewhere on your network that hosts a parent netinfo doman. 2. Create a folder somewhere on the server with all the fonts you want to show up, and then mak…
-
Don't be so stuck on Li-ion batteries. They do last longer, but when you are out with your camera and the batteries run out, you are screwed unless you buy another expensive battery from the mfr. One of my requirements in a camera is the use of A…
-
[quote]Originally posted by cheetah: first of all, i wasn't stealing anything. all my mp3's are from CD's I OWN. secondly, I CAN condemn an entire platform when I know other people who run OS X (on machines ranging from my Cube, to a strawberry i…
-
[quote]Originally posted by appdezine: someone recommended to me that i re-install OSX immediately upon getting a new mac, that it's always better than going with the factory install. is this common practice? Yes. Do this every time you buy a …
-
Ok - for the record. As far as 10.1 goes - 4k78 was NOT the first GM. 4k6x was. I'm not gonna say which number, but trust me, it wasn't. I also seriously doubt 98 is final either, since there are newer builds, and newer builds would branch …
-
I'm actually working on my own eBay application... so I *might* add that... but you can actually have ebay email you when new items appear that meet a certain criteria... check out the "mypage" link at the top the ebay webpage - it's all in there...