Prototype iPhone design was likely near-final - report
The general look and feel of the prototype iPhone recently discovered and disassembled will likely be very similar to the final shipping product of the next-generation handset Apple will release this summer.
Citing sources familiar with Apple's fourth-generation iPhone, Daring Fireball's John Gruber revealed that the barcode affixed to the prototype device obtained by Gizmodo, which read "N90_DVT-GE4X_0493," gives insight into how far along Apple is in the design of its next-generation phone.
"'N90' is Apple's codename for the fourth-generation GSM iPhone, slated for release this June or July," Gruber wrote. "'DVT' stands for 'design verification test,' an Apple production milestone. The DVT milestone is very late in the game; based on this, I now believe that this unit very closely, if not exactly, resembles what Apple plans to release."
He went on to say that although Apple is extremely secretive about unreleased products, it simply must let the units be used off of its Cupertino, Calif., campus to be tested. Apple reportedly distributes dozens of near-final units for field testing months in advance. Gruber said this practice is even more widespread with the iPhone than other Apple-developed products, because of the extensive nature of cellular network testing.
"The same was true for the 3GS a year ago, and the 3G the year before that," he wrote. "The original iPhone was announced six months before it went on sale; in the interim between the January announcement and its debut in stores at the end of June, limited numbers of them were used for field testing."
Even Apple co-founder Steve Jobs himself was spotted with an iPhone in public before the device was formally released to the masses.
The fact that the next-generation prototype iPhone was smaller and more compact than the current iPhone 3GS gave Apple the ability to wrap the test device with an outer casing that made it appear to look like a current-generation device. The person who allegedly found the handset at a bar didn't realize it was wrapped in a case until the next day.
The design of the iPhone has been largely unchanged from when it was first introduced in 2007, but the lost prototype and its near-final state would suggest Apple intends to modify the look of its handset. The discovered device abandons the curves of the previous-generation models, instead adopting a flat back made of new material to improve reception. It also sported a more angular look with an aluminum border. The prototype also replaced the volume rocker with two separate buttons.
Even greater changes were found inside the device, where Gizmodo discovered shrunken components to accommodate a battery that was 19 percent larger than the current-generation model's power supply. The logic board in particular was drastically reduced in size, just one-third the size of the current model.
Citing sources familiar with Apple's fourth-generation iPhone, Daring Fireball's John Gruber revealed that the barcode affixed to the prototype device obtained by Gizmodo, which read "N90_DVT-GE4X_0493," gives insight into how far along Apple is in the design of its next-generation phone.
"'N90' is Apple's codename for the fourth-generation GSM iPhone, slated for release this June or July," Gruber wrote. "'DVT' stands for 'design verification test,' an Apple production milestone. The DVT milestone is very late in the game; based on this, I now believe that this unit very closely, if not exactly, resembles what Apple plans to release."
He went on to say that although Apple is extremely secretive about unreleased products, it simply must let the units be used off of its Cupertino, Calif., campus to be tested. Apple reportedly distributes dozens of near-final units for field testing months in advance. Gruber said this practice is even more widespread with the iPhone than other Apple-developed products, because of the extensive nature of cellular network testing.
"The same was true for the 3GS a year ago, and the 3G the year before that," he wrote. "The original iPhone was announced six months before it went on sale; in the interim between the January announcement and its debut in stores at the end of June, limited numbers of them were used for field testing."
Even Apple co-founder Steve Jobs himself was spotted with an iPhone in public before the device was formally released to the masses.
The fact that the next-generation prototype iPhone was smaller and more compact than the current iPhone 3GS gave Apple the ability to wrap the test device with an outer casing that made it appear to look like a current-generation device. The person who allegedly found the handset at a bar didn't realize it was wrapped in a case until the next day.
The design of the iPhone has been largely unchanged from when it was first introduced in 2007, but the lost prototype and its near-final state would suggest Apple intends to modify the look of its handset. The discovered device abandons the curves of the previous-generation models, instead adopting a flat back made of new material to improve reception. It also sported a more angular look with an aluminum border. The prototype also replaced the volume rocker with two separate buttons.
Even greater changes were found inside the device, where Gizmodo discovered shrunken components to accommodate a battery that was 19 percent larger than the current-generation model's power supply. The logic board in particular was drastically reduced in size, just one-third the size of the current model.
Comments
I hope NOT. That's more like a design from HP than Apple.
I just hope they make the case more finished looking, like eliminate the gaps and such.
I hope NOT. That's more like a design from HP than Apple.
When HP releases its HP Pad, people will say that HP copied the new iPhone's design.
I just hope they make the case more finished looking, like eliminate the gaps and such.
I hope NOT. That's more like a design from HP than Apple.
Will the exterior design be the reason for getting the new iPhone or for what it will be capable of doing (feature set)? You can always get a case to cover it up.
When HP releases its HP Pad, people will say that HP copied the new iPhone's design.
That's because it's a cheap copy.
Will the exterior design be the reason for getting the new iPhone or for what it will be capable of doing (feature set)? You can always get a case to cover it up.
As a designer, the exterior is almost as important as the technology itself.
The gaps are flourishes to break up chrome lines and give it some character.
I think so too. Also consider when you drop it on it's side or the corner, with the gaps and the rubber between them, it may serve the purpose of reducing the possibility of bending the frame. The little give it can absorb in most medium to hard drops may be enough to allow the outer frame to keep it's shape.
The fact that it say DVT on it. means it the final test before going into to production. Apple protos follow this scheme, EVTx where x is a number (Engineering Verification Testing) there could be more than one of these and then DVT then followed by PVT. PVT is production validation testing and those are done the month or weeks prior to being release to full manufacturing.
The other numbers after the DVT is a serial number that allow them to track who has each unit and also indicate possible configuration information or model type
thats just not cool..seriously
there is a point where journalism ends..where is those guys' decency ..?
As a designer, the exterior is almost as important as the technology itself.
I'm a designer too. At first I was a little surprised by the design. However, the more I look at it the more I like. Are there things I would change.... probably, but that can be said about all products out there. I have the orig iPhone, and this design seems to going back to that look and more so that feel. Sleek, flat and to the point. It's actually thinner than the current model. How can that be a bad thing? I will only truly know how I feel about it once I've held it in my hands as with most objects that are meant to be held.
But like I said before... the phone's capabilities will be the factor in either making it a success or failure. Such as the forward facing cam, more storage, better rear camera, LED flash, more battery life, faster processor not to mention the new iPhone OS 4.
I hope NOT. That's more like a design from HP than Apple.
Huh? The design mimics the MacBook Pro, iMac, iPad, and Mac mini. What planet are you from?
If anything, the current iPod touch and iPhone don't mesh with Apple's current design language.
I just hope they put some kind of indicator on it so you can see if you've missed calls or something..
I hate checking my phone and have multiple missed calls and messages on it..
It's actually thinner than the current model. How can that be a bad thing?
Thinner is a good thing but ergonomy is sacrified in this design.
But like I said before... the phone's capabilities will be the factor in either making it a success or failure. Such as the forward facing cam, more storage, better rear camera, LED flash, more battery life, faster processor not to mention the new iPhone OS 4.
No complain about technology. It's as good as I can hope.
Reminds me of this: http://www.choice247.net/eshop/images/sonyericsson1.jpg
I, for one, am happy about the design, particularly a more resistant and flat back (I don't care about the front facing camera though)