Matte black iPhone 7 owners complain to Apple about chipping paint finish
A number of iPhone 7 and iPhone 7 Plus owners have issues with the handset's matte black finish, with some finding that the paint coating is prone to chip off.
The complaints typically concern the anodized finish around the speakers, as well as around the physical buttons and at the corners, as first discovered by 9to5mac. While the issues do typically appear on the iPhone's edges, typically where smartphones are likely to suffer damage compared to the flat sides, some users also note chipping issues on the back side, with more posts concerning the finish of the iPhone 7 Plus compared to the smaller iPhone 7.
One thread, that has spanned to four pages, with some users showing the chipped areas of their iPhones in photographs. In some instances, the posters mention that they have kept the iPhone in a case, theoretically protecting it from major damage, but the chips still appeared.
Apple's response to the complaints are considered unhelpful by posters, advising in some cases that it is classed as "cosmetic damage" that isn't typically covered under a warranty. In one post from earlier today, user "Phirsisch" claims the Apple Support helpline requested photographs of the case, to be forwarded on to Apple engineers for inspection.
While a case would hide some of the chipped areas from view, some users have taken it upon themselves to temporarily fix the finish themselves, using acrylic paint on affected areas.
Issues relating to the finish of iPhones have happened in the past. Shortly after the iPhone 5 was released, users complained that the black paint could be easily scuffed, with the problem briefly earning its own hashtag "#Scuffgate" on Twitter.
The matte Black finish was introduced last September during the iPhone 7 launch, alongside a glossy Jet Black option. At the time, Apple warned those opting for the Jet Black finish that it was more prone to scuffing and scratching compared to others, but this notice seemingly didn't apply to the other finishes, including matte Black.
The complaints typically concern the anodized finish around the speakers, as well as around the physical buttons and at the corners, as first discovered by 9to5mac. While the issues do typically appear on the iPhone's edges, typically where smartphones are likely to suffer damage compared to the flat sides, some users also note chipping issues on the back side, with more posts concerning the finish of the iPhone 7 Plus compared to the smaller iPhone 7.
One thread, that has spanned to four pages, with some users showing the chipped areas of their iPhones in photographs. In some instances, the posters mention that they have kept the iPhone in a case, theoretically protecting it from major damage, but the chips still appeared.
Apple's response to the complaints are considered unhelpful by posters, advising in some cases that it is classed as "cosmetic damage" that isn't typically covered under a warranty. In one post from earlier today, user "Phirsisch" claims the Apple Support helpline requested photographs of the case, to be forwarded on to Apple engineers for inspection.
While a case would hide some of the chipped areas from view, some users have taken it upon themselves to temporarily fix the finish themselves, using acrylic paint on affected areas.
Issues relating to the finish of iPhones have happened in the past. Shortly after the iPhone 5 was released, users complained that the black paint could be easily scuffed, with the problem briefly earning its own hashtag "#Scuffgate" on Twitter.
The matte Black finish was introduced last September during the iPhone 7 launch, alongside a glossy Jet Black option. At the time, Apple warned those opting for the Jet Black finish that it was more prone to scuffing and scratching compared to others, but this notice seemingly didn't apply to the other finishes, including matte Black.
Comments
it's possible here, that the paint, as that's what it looks like, isn't bonding as well as it should.
I have three different iPhone cases that I rotate on occasion and I even sometimes carry it without one and it's been rock solid. Of course I haven't dropped it and don't run my finger nails on it.
I know people with iPhones who have cases on them and they still get scratches on them. Of course the catch is that they are constantly playing with the case, like a nervous tick, removing it and putting it back on constantly.
Rub a metal surface often and long enough, and wear and tear will eventually show up.
First!!
Mary from Minnesota is claiming undue duress due to chipping on her phone
/S
This is happening about 6 months after they went on sale and there seems to be do indication that it's a bad batch, so I'm guessing it's just wearing and tear. Can Apple use a better system next time? Possibly; I'm certain they're looking into this and are always looking to try to make things more durable when feasible.
Except where I dropped it on a corner my matte black iPhone is otherwise unfazed.
Judging by the photos I suspect that the actual buttons are anodized but the case itself appears to be painted, probably because of the difficulty in producing a uniform jet black matte finish on a large flat area. Perhaps a better solution would have been to anodize it first before painting it. At least then if it chipped it would still be black underneath. Paint actually sticks to anodized surfaces really well, much better than bare aluminum even with zinc chromate primer.
Flakegate
Much ado about nothing gate
I use these cases $A600 worth, Australian made in saltwater crocodile and ostrich, lined with kangaroo suede.
http://www.rmwilliams.com.au/rmw-crocodile-iphone-6/CPM9OZC.html?dwvar_CPM9OZC_color=02&lang=en_AU#lang=en_AU&start=1
http://www.rmwilliams.com.au/rmw-exotic-ost-iphone6-holder/CPM9OXC.html?dwvar_CPM9OXC_color=02&lang=en_AU#lang=en_AU&start=1